Volver al inicio
Products | Company | References | COUTH in the world
 
Pressure Marking - PM 50/10 - PM 50/20
  
 
PM 50/10 - PM 50/20 PN 10/67 - PN 10/113 PN 2C - PNB 4800 - PNB 7000 PC 9
PM 50/10 - PM 50/20

 
BY MEANS OF A HYDROPNEUMATIC PRESSURE CONVERTER, THE FORCE OF THESE MACHINES IS BOOSTED AND CAN REACH SILENTLY AND QUICKLY AS MUCH AS 20 TONS AND 10 TONS RESPECTIVELY, WITH MINIMUM AIR CONSUMPTION, FOR OPERATIVE STROKES UP TO 2mm AND 4.5mm. THESE MODELS ARE THUS IDEAL FOR MARKING AND RIVETING OR SIMILAR OPERATIONS.

These presses feature a quick approach stroke and an operative stroke ranging from 0 to 35mm. The operative stroke at maximum force starts automatically as the pressing tool comes into contact with the workpiece at the end of the approach stroke.

By maintaining constant the product of the force (tons) by the operative stroke (mm), which is 50 for the models concerned, other machines can be made available for different applications (for instance, 5 tons and a theoretical operative stroke of 10mm).
  Characteristics
Quick traverse
Force, 6atm air pressure = 800 kg. Adjustable from 3 to 7 kg/cm²
Pressing
-Force, 6atm = 20,000 kg and 10,000 kg, continuously adjustable from 0 to 7atm air pressure
-Maximum operative stroke: 2mm and 4.5mm, automatic after the quick traverse.
Air supply
-Compressed air supply connected to the filtering unit.
Pressure: 3 to 7atm depending on requisite force.
Control
- Air-operated pedal (push-buttons, etc., on request)
Working position
Any
Weight
285 kg complete, cylinder alone 53 kg

Some Applications
PM50/20 special for simultaneous multiple riveting, with double safety control