Optional TRANSFER
software enables transmitting the MC2000 C data through an
RS-232 interface to a PC.
Barcode reader.
Graphics mode capability for MC2000 L model, using WINDOWS-supported
MARCAD
software.
Logotypes
Selection of text to be marked from a predefined range,
through the RS-232 serial communications for the MC2000
C model..
Same as previous optional feature, but through an 8-input/output
EXPAND parallel port. This also permits implementing other
"customised" control programs
Marking head with powered
Z-axis and position indicator
for N models.
Machines with U marking head configuration normally
require the support with jogging
device and micrometric settingof the marking
stylus-to-part distance.
Another accessory very useful for U models too is the front
or cross manipulator or the marking head forward
and backward motions
1. Front Manipulator 2. Cross Manipulator 3. Cross Manipulator
Plate
feeder suitable for minimum plate thickness of 0.3mm
(according to size and grade). It is adjustable to process plates
from 30 to 105mm in length and from 20 to 75mm in width, on
standard model. Other dimensions on request.
Plate
locator and magnetic dogs.
Stand
for portable models.
Rotating
fixture allowing cylindrical parts to be
marked.
Extranet
Optional 
