Optional TRANSFER
software enables transmitting the MC 2000 C machine data through
an RS 232 interface to a PC.
Bar-code reader.
Graphics mode capability for MC2000 L model, using WINDOWS-supported
MARCAD
software.
Logotypes
Selection of text to be marked from a predefined range, through
the RS-232 serial communications for the MC2000 C model.
Same as previous optional feature, but through an 8-input/output
EXPAND parallel port. This also permits implementing
other "customised" control programs.
Marking head with powered Z-axis and position
indicator for N models.
Machines with U marking head configuration
normally require the support with jogging device and micrometric
setting of the marking stylus-to-part distance.
Another accessory very useful for U models too is the front
or cross manipulator or the marking head forward and backward
motions .
1. Front Manipulator 2. Cross Manipulator 3. Cross Manipulator
Plate feeder suitable for
minimum plate thickness of 0.3mm (according to size and grade).
It is adjustable to process plates from 30 to 105mm in length
and from 20 to 75mm in width, on standard model. Other dimensions
on request.
Plate locator and magnetic
dogs.
Rotating fixture allowing cylindrical
parts to be marked.
Extranet
Optional 
